gentleman
looking for a parts list on a aermotor pump, main body p1330/p1320 once upon a time i think gregg posted one
thanks Paul
AERMOTOR PUMP
Re: AERMOTOR PUMP
I will look for it tomorrow. If I find it, Paul can put it in the library.
Re: AERMOTOR PUMP
Paul,
Is this what you were looking for? I remember we had discussion on the P1321 handle being 8 inch stroke and the P1331 being a 12 inch stroke. And, as you and I were looking at the difference in the handles at the trade fair, the P1321 has one hole and the P1331 has 2 holes. Hope this helps, not sure where I got this, but if Paul V. wants to put it in the library it is ok with me.
Gregg
Is this what you were looking for? I remember we had discussion on the P1321 handle being 8 inch stroke and the P1331 being a 12 inch stroke. And, as you and I were looking at the difference in the handles at the trade fair, the P1321 has one hole and the P1331 has 2 holes. Hope this helps, not sure where I got this, but if Paul V. wants to put it in the library it is ok with me.
Gregg
You do not have the required permissions to view the files attached to this post.
Re: AERMOTOR PUMP
gregg
thats it thanks
Paul
thats it thanks
Paul
Re: AERMOTOR PUMP
I found a AER MOTOR P1330 are there any parts available these units?
Re: AERMOTOR PUMP
Is that a hand pump? What is it?
Call Dan Benjamin for parts. P M me for the phone number.
Re: AERMOTOR PUMP
Its a hand pump just like the ones in pic,s above I have been soaking bolts and may take apart this weekend.
-
- Posts: 535
- Joined: Fri Dec 28, 2018 9:33 pm
Re: AERMOTOR PUMP
Funny Thing about pumps is 75% of all mills around here are Aermotor, I probably have 200 junk 602 and 702 heads I have picked up yet only one Aermotor pump. Virtually all pumps around here are Nelson Mfg with a local trade name on the other side.