8' aermotor v rod measurements

Share and discuss your windmill related projects.
Post Reply
Billt
Posts: 48
Joined: Tue Apr 21, 2020 4:43 pm
Location: Iron River Mi.

8' aermotor v rod measurements

Post by Billt »

Trying to get all my parts ready for spring to install my 21' tower and fan. Have a used mill and some of v rods are bent. What is a rough measurement of the wide end of the v rods. Not sure if the ones that aren't bent is right. Any help would be appreciated. Thanks Bill
IvanBlock
Posts: 85
Joined: Wed Jan 02, 2019 8:57 am
Location: central Wisconsin

Re: 8' aermotor v rod measurements

Post by IvanBlock »

Bill that measurement is 38 1/2" but if you're within a couple of inches its good. They will flex enough to get them into the outer rim holes. I'm located just a little over a hundred miles southwest of you near Wausau. If you need any other info or Aermotor parts let me know. I've rebuilt 7 or 8 Aermotors every year (or more) since I retired 12 years ago, so do have some experience with them...
Billt
Posts: 48
Joined: Tue Apr 21, 2020 4:43 pm
Location: Iron River Mi.

Re: 8' aermotor v rod measurements

Post by Billt »

Thanks for the reply.. would like to talk to you as I will be needing some parts..feel free to call me. Bill
906-two 8 four- 944 eight
Post Reply