Dempster 14

Share and discuss your windmill related projects.
Post Reply
Mike Hage
Posts: 285
Joined: Mon Dec 21, 2020 12:37 pm
Location: Gibbs

Dempster 14

Post by Mike Hage »

20210530_131740.jpg
I put this mill together today. Does anyone have any ideas on getting started building the fan sections? What type of wood. Where can I find dimensions? It's in rough shape, got used a little for target practice but I've got a line on some parts ones. Thank you Windy for the info on the pullout tube got it all cleaned up and got it sort of working. There is a lot of mechanism to overcome to pull it in
You do not have the required permissions to view the files attached to this post.
Wayne
Posts: 2115
Joined: Mon Dec 17, 2018 10:03 am
Location: Corsicana Tx.

Re: Dempster 14

Post by Wayne »

I'd wonder if the wheel sections would be the same as a 3 and 4.
Terry
Posts: 222
Joined: Thu Dec 27, 2018 8:32 pm
Location: Moundridge Ks.

Re: Dempster 14

Post by Terry »

Yes
the wheel sections for the 14 are the same as the 3 or 4.
I have been working on a # 14
Terry
Mike Hage
Posts: 285
Joined: Mon Dec 21, 2020 12:37 pm
Location: Gibbs

Re: Dempster 14

Post by Mike Hage »

Where can I find dimensions for the wood?
Terry
Posts: 222
Joined: Thu Dec 27, 2018 8:32 pm
Location: Moundridge Ks.

Re: Dempster 14

Post by Terry »

I could get.you some dimension's for that.
It will be next week before I can get them.
Terry
Mike Hage
Posts: 285
Joined: Mon Dec 21, 2020 12:37 pm
Location: Gibbs

Re: Dempster 14

Post by Mike Hage »

Thank you that would be wonderful
Terry
Posts: 222
Joined: Thu Dec 27, 2018 8:32 pm
Location: Moundridge Ks.

Re: Dempster 14

Post by Terry »

I will get them measured.
Terry
Terry
Posts: 222
Joined: Thu Dec 27, 2018 8:32 pm
Location: Moundridge Ks.

Re: Dempster 14

Post by Terry »

Mike
I sent you a PM
Terry
joe herman
Posts: 210
Joined: Fri Jun 07, 2019 6:21 pm
Location: Rosedale,Alberta

Re: Dempster 14

Post by joe herman »

Hi Terry,
Guess I will also need those dimensions when its comes time for me to work
on my Dempster #14.
Hope we will get the castings by fair time.
Joe
Mike Hage
Posts: 285
Joined: Mon Dec 21, 2020 12:37 pm
Location: Gibbs

Re: Dempster 14

Post by Mike Hage »

Thank you Terry. I'll likely have a few questions for you once I get into it. I'll have to gather up some sticks first. What type of wood are we looking at? I'll share this with Joe too
Post Reply