Mystery part
Mystery part
Found this under my Dempster 14. Not sure if it belongs. Any ideas?
You do not have the required permissions to view the files attached to this post.
Re: Mystery part
That's an old style Dempster pullout tube. That bottom part should be free to spin. Not sure if it's actually for the 14. I'm not familiar with that mill. Could be though.
Call Dan Benjamin for parts. P M me for the phone number.
Re: Mystery part
Oh tell me more! The bottom part does spin. So the flat iron hooks to the pullout chain and the u bolt hangs down? Doesn't that Interfere with the wooden pump rod and swivel?
Re: Mystery part
Yes and no. The L bar goes thru the tower legs to keep the swivel from rotating.
Yes the top hooks to the chain.
If the pumprod is long enough it will be below the U bolt. The pumprod should have a swivel so the wood pole does not rotate.
Yes the top hooks to the chain.
If the pumprod is long enough it will be below the U bolt. The pumprod should have a swivel so the wood pole does not rotate.
Call Dan Benjamin for parts. P M me for the phone number.
Re: Mystery part
I see thank you Windy bob
Re: Mystery part
Found a picture of another one and sure enough that pullout is there.
You do not have the required permissions to view the files attached to this post.
