Pump tower ID and centering bracket?

Have a part you can't identify? Did your parts get mixed up in the shop? Curious if that chunk of metal is a part you should keep? Not sure what kind of windmill or tower you have? Post photos of the mystery object here for the community to help identify.
Post Reply
hans109h
Posts: 2
Joined: Mon Aug 10, 2020 10:42 am
Location: Midwest

Pump tower ID and centering bracket?

Post by hans109h »

Can anyone help identify what's going on on the top of my tower? To me it appears that the pipe coming out of the top is threaded into the tube held in place by the centering bracket. I've managed to break off and bend a couple of the threaded rods, so if anyone has any bright ideas on replacement I'm all ears.

Thanks,

Hans


Image
Image
Image
Image
Image
Top
User avatar
Bryon
Posts: 206
Joined: Sat Feb 16, 2019 4:35 pm
Location: Eastman, GA

Re: Pump tower ID and centering bracket?

Post by Bryon »

The top of that tower was modified/customized from its original design. It is not for holding and Aermotor anymore. The tower was made by Aermotor.
Top
hans109h
Posts: 2
Joined: Mon Aug 10, 2020 10:42 am
Location: Midwest

Re: Pump tower ID and centering bracket?

Post by hans109h »

Thanks for identifying it!

Hans
Top
Post Reply

Return to “Name That Part (or Windmill or Tower)”