Samson / Stover steps / rungs

Generally speaking, this area is for general discussion about things in general, in most cases.
Post Reply
mtblah
Posts: 1624
Joined: Thu Mar 26, 2020 12:09 pm
Location: new braunfels TX

Samson / Stover steps / rungs

Post by mtblah »

I just received the new replacement steps made by Windy Bob.
Better than the original as you can see in the attached photos
My tower is not ready to attached the ladders but as you know one (step) part at a time.
This is a much larger project than I imagined when seeing it lying in the farers field.
after the Samson tower is up then I start on the Aermotor 8 foot fan & engine
Mike B
New Braunfels TX
You do not have the required permissions to view the files attached to this post.
User avatar
windybob
Posts: 3503
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Samson / Stover steps / rungs

Post by windybob »

Thanks!
Call Dan Benjamin for parts. P M me for the phone number.
Wayne
Posts: 2115
Joined: Mon Dec 17, 2018 10:03 am
Location: Corsicana Tx.

Re: Samson / Stover steps / rungs

Post by Wayne »

Sometime when I get into a project I wonder why am I here. Every nut you take loose seems to open another can of worms!
User avatar
Jim Corcoran
Posts: 291
Joined: Fri Dec 21, 2018 7:32 am
Location: Austin, Texas

Re: Samson / Stover steps / rungs

Post by Jim Corcoran »

I concur with Mike B. These are very nicely done. I don't have mine mounted yet - it seems I've misplaced my collection of rivets. Many thanks to Bob for making these.
Jim
Stover rungs.jpg
You do not have the required permissions to view the files attached to this post.
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
User avatar
windybob
Posts: 3503
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Samson / Stover steps / rungs

Post by windybob »

Thanks guys.!
Call Dan Benjamin for parts. P M me for the phone number.
Wayne
Posts: 2115
Joined: Mon Dec 17, 2018 10:03 am
Location: Corsicana Tx.

Re: Samson / Stover steps / rungs

Post by Wayne »

Windy Da Man!
mtblah
Posts: 1624
Joined: Thu Mar 26, 2020 12:09 pm
Location: new braunfels TX

Re: Samson / Stover steps / rungs

Post by mtblah »

Windy was right again.
Got Aermotor A 702 dissembled this morning !
Windy stated to another newbie that most all Aermotor vane pin's are worn & the case is also worn !
attached photos , that is correct !
Mike B
New Braunfels TX
You do not have the required permissions to view the files attached to this post.
Post Reply