remove/install 20' Samson Main Shaft

......when you need to get in the weeds.
Post Reply
Overkill
Posts: 119
Joined: Thu Aug 15, 2019 9:20 pm

remove/install 20' Samson Main Shaft

Post by Overkill »

Hello,

Does anyone know the steps required to remove/install the main shaft in a 20' Model S
Thanks,
Jake

20ft Samson
User avatar
windybob
Posts: 3503
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: remove/install 20' Samson Main Shaft

Post by windybob »

Well...I always take out everything else first. That clears the way for getting rough if you need to. Hopefully it's pretty well oiled and not rusty. I have no idea how to even manhandle something that big. Once you get everything else out, and clear the way, you can start taking mainshaft stuff loose and see what slides and what does not. Samson mills do tend to use tapered keys where keys are used, so be careful driving on a key. Unless the hub is loose on the shaft, you can usually take it out with the shaft.

These are usual steps. In your case I can't offer much detail due to size and engineering issues on big ones.
Call Dan Benjamin for parts. P M me for the phone number.
Post Reply