SOLD - Clayton Mark Deep Well Pump

Sell your mills or parts. All ads require location and prices!
Post Reply
gregguy
Posts: 72
Joined: Mon Mar 30, 2020 3:05 pm
Location: Dallas Oregon

SOLD - Clayton Mark Deep Well Pump

Post by gregguy »

Pump Well Cylinder, NEW/NOS 1 1/2" X 20", all brass.
Made in the USA

Brand new Clayton Mark, an open top all brass well cylinder 1 1/2" X 20" size.
Perfect in every way. Includes 2 leather pump valve a single leather foot valve.
Fits standard 1 1/2 " pipe. Looks like a 1 pipe thread on the bottom.
My guess is this should be used for a 12" or shorter stroke.

Says MADE IN USA on the casting.

$150 with shipping
You do not have the required permissions to view the files attached to this post.
Ron Stauffer
Posts: 431
Joined: Fri Dec 14, 2018 10:25 am
Location: Uncompahgre Plateau Montrose CO
Contact:

Re: Clayton Mark Deep Well Pump

Post by Ron Stauffer »

You may want to double check your cylinder ID and pipe size for this. Cylinder ID of 1.5" and drop pipe size of 1.5" (1.61" ID actual) only gives less than 1/8 of clearance to pull the working check and bottom check through the drop pipe as you would do on an open top cylinder. 1 7/8 cylinder on 2 pipe has .2 clearance and is tight on pipe that has been in and corroded.

BTW, I have had a US made Clayton Mark 2.75" open top cylinder on my own well for over 7 years with no issues. Mine doesnt have the spring loaded checks but does have spool checks vs ball. I dont run across much CM cylinders as there was no distributor in this area, I think I got mine from someone's inventory I bought out.

Ron Stauffer
Montrose CO
gregguy
Posts: 72
Joined: Mon Mar 30, 2020 3:05 pm
Location: Dallas Oregon

Re: Clayton Mark Deep Well Pump

Post by gregguy »

This pump has sold.
Not sure how to remove the ad...............thanks
Post Reply