Mast pipe base for B602/702 Aermotor

Need something? Post your request here.
Post Reply
User avatar
JBarker
Posts: 431
Joined: Wed Jan 23, 2019 9:07 am
Location: Wills Point, Texas

Mast pipe base for B602/702 Aermotor

Post by JBarker »

Looking for a mast pipe base or both base and pipe for 3 post tower. B602/702 10 ft wheel Aermotor. Thanks.
Jerry Barker
Wills Point, Texas
214-893-2864
larrychilton
Posts: 19
Joined: Sun Dec 16, 2018 4:32 pm
Location: Georgetown, Tx

Re: Mast pipe base for B602/702 Aermotor

Post by larrychilton »

Jerry,

I have a mast pipe (no good) still attached to base cast B675 for 3-legged Aermotor tower.

Will take $25 for the base and you can remove the mast pipe. You've been to my place once or twice before in Georgetown, Tx.

Larry Chilton
User avatar
JBarker
Posts: 431
Joined: Wed Jan 23, 2019 9:07 am
Location: Wills Point, Texas

Re: Mast pipe base for B602/702 Aermotor

Post by JBarker »

larrychilton wrote: Sun Jan 26, 2020 2:27 pm Jerry,

I have a mast pipe (no good) still attached to base cast B675 for 3-legged Aermotor tower.

Will take $25 for the base and you can remove the mast pipe. You've been to my place once or twice before in Georgetown, Tx.

Larry Chilton
Thanks Larry, I will take it off your hands. I'm coming to South Texas on the weekend of Feb 14th or the 15th. I will hook up with you then if ok with you. I will text you before I head that way. Thank you.

Jerry
214-893-2864
Jerry Barker
Wills Point, Texas
214-893-2864
JLM
Posts: 63
Joined: Fri Oct 11, 2019 1:59 pm
Location: Texas

Re: Mast pipe base for B602/702 Aermotor

Post by JLM »

If you need a lower furl finger pincher for a three leg stub i have some
User avatar
windybob
Posts: 1171
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Mast pipe base for B602/702 Aermotor

Post by windybob »

Btw be careful separating the base from the pipe. I have broken the base trying to remove the mastpipe before. I am more careful these days.
Memory plant.... Change or clean the air filter in your air compressor! Mine runs 1/4 as much, and tools run better.
User avatar
JBarker
Posts: 431
Joined: Wed Jan 23, 2019 9:07 am
Location: Wills Point, Texas

Re: Mast pipe base for B602/702 Aermotor

Post by JBarker »

windybob wrote: Tue Jan 28, 2020 7:09 am Btw be careful separating the base from the pipe. I have broken the base trying to remove the mastpipe before. I am more careful these days.
Thanks Windy, what do you recommend?

Jerry
Jerry Barker
Wills Point, Texas
214-893-2864
User avatar
windybob
Posts: 1171
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Mast pipe base for B602/702 Aermotor

Post by windybob »

Getting someone else to do it...LOL

Maybe some heat will help.
Memory plant.... Change or clean the air filter in your air compressor! Mine runs 1/4 as much, and tools run better.
User avatar
Bryon
Posts: 92
Joined: Sat Feb 16, 2019 4:35 pm
Location: Eastman, GA

Re: Mast pipe base for B602/702 Aermotor

Post by Bryon »

Taking the base off a mast pipe for an 8ft mill requires a 48in pipe wrench to make it an "easy" job. I cannot imagine what it will take for a 10ft. :o :shock: :o
larrychilton
Posts: 19
Joined: Sun Dec 16, 2018 4:32 pm
Location: Georgetown, Tx

Re: Mast pipe base for B602/702 Aermotor

Post by larrychilton »

Ok, Jerry,

No rush on the mast pipe base, Will look forward to your visit in February.

Larry
Post Reply