Stover model M

Russail · Post by **Russail** » Tue Oct 05, 2021 6:45 am

Does anyone have a color photo of this model or know the original color?

Wayne · Post by **Wayne** » Tue Oct 05, 2021 9:11 am

Something other than John Deere Green seemed to be a color they liked.

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Tue Oct 05, 2021 9:30 am

I mixed Hunter green and John Deere green on my Stover

CTXmiller · Post by **CTXmiller** » Tue Oct 05, 2021 3:28 pm

Think black was the determination for most Stover mills, but the airflow was green. Seems that is what I recall from a prior thread on here.

Post by **PaulV** » Tue Oct 05, 2021 4:39 pm

CTXmiller wrote: ↑Tue Oct 05, 2021 3:28 pm Think black was the determination for most Stover mills, but the airflow was green. Seems that is what I recall from a prior thread on here.

I agree

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Tue Oct 05, 2021 5:17 pm

Did they use the color black on their open gear models too?

Russail · Post by **Russail** » Tue Oct 12, 2021 6:40 am

20210918_080519.jpg

One more question in a line of many before I'm done.
Any idea on what this says? Something about zero oil

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Tue Oct 12, 2021 10:12 am

I'm guessing the weight oil they recommend.

Wayne · Post by **Wayne** » Wed Oct 13, 2021 8:28 am

I've seen that on an old grain drill I rebuilt. Use zero weight oil, means light oil.

Kenneth · Post by **Kenneth** » Thu Oct 14, 2021 5:12 am

Sometimes if you wet it down with water, you can see the lettering better.

Kenneth

Vintage Windmill and Wind Generator Forum

Stover model M

Stover model M

Re: Stover model M

Re: Stover model M

Re: Stover model M

Re: Stover model M

Re: Stover model M

Re: Stover model M

Re: Stover model M

Re: Stover model M

Re: Stover model M