Flint & Walling 12

[Mister Ed]

Hmmm ... I cant remember how the spring attaches to the vane.
I have seen several like this, and it is probably not right (that might even be mine in Ivan's driveway):

Screenshot 2022-05-12 204737.jpg

I also have this pic:

Screenshot 2022-05-12 204825.jpg

Mike - Looks like you got all the original parts you were looking for!

[Mike Hage]

I think that second picture is the ticket a longer rod to the vane. Does anyone else have any pictures of what the attachment part is supposed to look like?

[Mike Hage]

20220426_225209.jpg

I put an ad in the windmillers gazette and a fellow from Indiana responded. He sent me the measurements for the tail irons, the latch trip thing, 2 of the bottom swivel castings and a spring. The spring is not in good shape but I'm having a neeew one made. Dan B is sending me a broken top swivel casting and the missing oil cup covers. It's on the way. Then I should have everything. I just need to figure out this attachment and up she goes one piece at a time. This vane is huge I hope I'm strong enough to mount it up there. I really want to thank you guys for all your patience and help. I couldn't have done it without all your pictures and measurements.

20220426_225239.jpg

[Mike Hage]

20220605_214425.jpg

20220605_214540.jpg

It's coming together boys! Put it all together on my stub tower it runs smooth and quiet. Just have to paint the spring and make the pull rods. Word of advice... make sure the stub tower is big enough. The first time I put it together it toppled over lucky I didn't break any castings

[mtblah]

Nice , very nice , good job !

[Windcatcher530 Dan]

Nice job Mike

[CTXmiller]

Very nice

[windybob]

thumbs up.png

[Kenneth]

When you put the mainframe up, you need to try to have the tailbone and vane on it before it goes up. If not, it's a pain in the you know what! Ask me how I know.

Kenneth

[Mike Hage]

I have no crane for this one. Plus where it's going there are trees all around. I'm gonna have to rope it up piece by piece. The tail is going to be the toughest piece but I think I have a system. Oh and I'm a Dutchman, very stubborn! My cousin has been with his finger in the duke holding back the north sea for hundreds of years. I'll get that thing up there one way or another!