Stover Samson M or S fan - 14' diameter - SOLD

Sell your mills or parts. All ads require location and prices!
Post Reply
User avatar
PaulV
Site Admin
Posts: 998
Joined: Wed Dec 12, 2018 10:52 pm
Location: Collinsville, Oklahoma
Contact:

Stover Samson M or S fan - 14' diameter - SOLD

Post by PaulV »

Complete windmill fan - 6 sections. This is a very large fan... 14 feet in diameter. Believed to be from a Stover Samson model M or S. Chime in if I'm incorrect. A clip is broken on inner band of 2 sections. Some rust on the back of a few sails from ground contact. Otherwise in good shape for their age and size. $750 or reasonable offer. If price is way off, then chime in also.
IMG_20220629_193555.jpg
IMG_20220629_193723.jpg
IMG_20220629_193736.jpg
IMG_20220701_111109.jpg
IMG_20220701_111138.jpg
IMG_20220701_111143.jpg
IMG_20220701_111148.jpg
IMG_20220701_111154.jpg
IMG_20220811_123352.jpg
IMG_20220811_123403.jpg
IMG_20220811_123410.jpg
IMG_20220811_123425.jpg
You do not have the required permissions to view the files attached to this post.
PaulV
mtblah
Posts: 1624
Joined: Thu Mar 26, 2020 12:09 pm
Location: new braunfels TX

Re: Stover Samson M or S fan - 14' diameter

Post by mtblah »

Paul , all that concrete is way too clean , i'm impressed ! Mike B
User avatar
windybob
Posts: 3503
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Stover Samson M or S fan - 14' diameter

Post by windybob »

Paul, I have a 14 ft Mod S wheel, and the sails are rectangular. Same width on the bottom as the top. In fact, I have the entire mill. Maybe yours is off an M? not sure.
Call Dan Benjamin for parts. P M me for the phone number.
Windcatcher530 Dan
Posts: 1901
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Stover Samson M or S fan - 14' diameter

Post by Windcatcher530 Dan »

I think it is a M.
User avatar
PaulV
Site Admin
Posts: 998
Joined: Wed Dec 12, 2018 10:52 pm
Location: Collinsville, Oklahoma
Contact:

Re: Stover Samson M or S fan - 14' diameter

Post by PaulV »

Sold. Thanks guys!
PaulV
Post Reply