G'day from Tasmania

For New Members. Tell us about yourself.
Post Reply
Stephen Scott
Posts: 2
Joined: Fri Jan 27, 2023 5:30 pm
Location: Northern Tasmania, Australia

G'day from Tasmania

Post by Stephen Scott »

G'day Peoples,
I have a working Alston 33 windmill, I'm not good with computers but have tried to upload a video of windmill.
The windmill was refurbished and erected on this site about 25 years ago, the oil pump has stopped working on last inspection and my question to the brains trust is, can the oil pump be removed without taking the back plate from the main housing ?
I have loosened the oil pump at the top of the bottom section but it seems it is also attached on the bottom.
A good picture of the gearbox if anybody has one would be appreciated.
User avatar
Peter vk
Posts: 313
Joined: Sat Dec 15, 2018 11:30 am
Location: Chesterville Ontario Canada
Contact:

Re: G'day from Tasmania

Post by Peter vk »

It's been a while since I rebuilt mine, here's what the inside looks like with the cover off. I think the cover needs to come off to get the pump out.
Peter
You do not have the required permissions to view the files attached to this post.
mtblah
Posts: 1624
Joined: Thu Mar 26, 2020 12:09 pm
Location: new braunfels TX

Re: G'day from Tasmania

Post by mtblah »

Peter , thank you knowing that exact information and willing to share .
Stephen Scott
Posts: 2
Joined: Fri Jan 27, 2023 5:30 pm
Location: Northern Tasmania, Australia

Re: G'day from Tasmania

Post by Stephen Scott »

Thanks Peter, I knew in the back of my mind the cover had to be removed but was hoping !!!
Post Reply