Anyone know what model Flint & Walling mill this belongs to? It looks identical to my 8-foot Star 37 but is 9'-7.5" long. It has what appears to be a pullout arm wired to it.
Thanks in advance for any help.
Jim
Tail bone ID
-
Jim Corcoran
- Posts: 294
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Tail bone ID
You do not have the required permissions to view the files attached to this post.
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
Re: Tail bone ID
I’d agree 10’ #37
-
Jim Corcoran
- Posts: 294
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Re: Tail bone ID
So that would be a WD?
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
Re: Tail bone ID
When I think of a WD, I think of a Baker-Monitor WD which is a 10’ diameter. I think it is a Flint & Walling Star #37 in the 10’ size.
Re: Tail bone ID
Correct, that is not a Monitor vane.
Call Dan Benjamin for parts. P M me for the phone number.
-
Jim Corcoran
- Posts: 294
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Re: Tail bone ID
Yep, my senior moment. Crossed the F&W with my Baker WB.
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
