Rebuilding Dempster 10 ft no 12
Re: Rebuilding Dempster 10 ft no 12
The difference in the weight is the 1st thing that struck me , wow . 10 ft'r is HEAVY , oh , that's why most of you guy's have gin poles , fork lift , overhead chain fall , cherry picker , etc. to lift the load .
Re: Rebuilding Dempster 10 ft no 12
They are much heavier the bigger they get and I’d imagine your 10’ #12 is heavier than my 10’ #15 with the #12 having two pinions and two bull gears. I can pick up most 8’ gearboxes, but I use the tractor frontend loader for the 10’ ones or bigger.
Re: Rebuilding Dempster 10 ft no 12
The older we get the heaver a 100lbs gets.
Re: Rebuilding Dempster 10 ft no 12
Well , reassmbly started today , 1st bearing race is installed , piece of cake !
You do not have the required permissions to view the files attached to this post.
Re: Rebuilding Dempster 10 ft no 12
Mike, the guiderod that screws in above that race screws down on it to hold it tight. Make sure the race is all the way in before tightening that guiderod down.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Re: Rebuilding Dempster 10 ft no 12
it was "pressed " in up to the keeper that stops movement , and thank you for the heads up .
another lesson learned from the professional's
another lesson learned from the professional's
