Tower with Wire Stretchers

Have a part you can't identify? Did your parts get mixed up in the shop? Curious if that chunk of metal is a part you should keep? Not sure what kind of windmill or tower you have? Post photos of the mystery object here for the community to help identify.
Post Reply
User avatar
NV-WindmillProject
Posts: 467
Joined: Wed Oct 22, 2025 4:49 pm
Location: Las Vegas NV

Tower with Wire Stretchers

Post by NV-WindmillProject »

This tower has these wire stretchers on the upper section (the lower parts don't have these). Most likely factory-made but I could be wrong, because the owner said this was brought down from South Dakota to his home in Las Vegas.
What brand of tower do you think this is?

Thanks :)
-- Venn


BTW that ring in the middle was the pump rod guide is case you were wondering.
You do not have the required permissions to view the files attached to this post.
Last edited by NV-WindmillProject on Tue Jan 13, 2026 6:31 pm, edited 1 time in total.
-- Venn
Top
Windcatcher530 Dan
Posts: 2806
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Tower with Wire Stretchers

Post by Windcatcher530 Dan »

I believe that's a demster tower not a expert on Dempster. But I believe the X braces tighteners are farmers solution !!
Top
Wayne
Posts: 2573
Joined: Mon Dec 17, 2018 10:03 am
Location: Corsicana Tx.

Re: Tower with Wire Stretchers

Post by Wayne »

I think they are factory I had a tower like that. Sold it in September.
Top
Wayne
Posts: 2573
Joined: Mon Dec 17, 2018 10:03 am
Location: Corsicana Tx.

Re: Tower with Wire Stretchers

Post by Wayne »

If anybody needs any of those twist wires I have some. I know they can be shipped as Dave Straup sent me some.
Top
User avatar
windybob
Posts: 4428
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Tower with Wire Stretchers

Post by windybob »

I've got a whole slew of those too. They just keep piling up.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Top
User avatar
NV-WindmillProject
Posts: 467
Joined: Wed Oct 22, 2025 4:49 pm
Location: Las Vegas NV

Re: Tower with Wire Stretchers

Post by NV-WindmillProject »

Just noticed that there are these splices, so it's most likely Dempster
You do not have the required permissions to view the files attached to this post.
-- Venn
Top
Post Reply

Return to “Name That Part (or Windmill or Tower)”