Measurements at tower base
Measurements at tower base
Don’t know if Ken Obrock is in this new forum,but on the old forum he had posted a formula that,so many feet of height of a tower equaled so many feet between the legs.Anyone remember or know that formula?
-
- Posts: 468
- Joined: Fri Dec 14, 2018 10:25 am
- Location: Uncompahgre Plateau Montrose CO
- Contact:
Re: Measurements at tower base
This works for standard spread towers only. Footprint of a 27' tower is 5' 6 3/4". Then you can use this:
For every 5' additional height you would add one foot to footprint. Any heights in between, you can extrapolate linearly for a number.
Ron Stauffer
Montrose CO
For every 5' additional height you would add one foot to footprint. Any heights in between, you can extrapolate linearly for a number.
Ron Stauffer
Montrose CO
You do not have the required permissions to view the files attached to this post.
Re: Measurements at tower base
This is good info if you have an old Aermotor tower
You do not have the required permissions to view the files attached to this post.
Re: Measurements at tower base
In the books, Aermotor standard towers are spread, 1/4 the height. Dempsters are 1/5 the height. Or the other way around. Be sure to correct me if I'm wrong.
Call Dan Benjamin for parts. P M me for the phone number.