Anchoring tower

......when you need to get in the weeds.
User avatar
PaulV
Site Admin
Posts: 1134
Joined: Wed Dec 12, 2018 10:52 pm
Location: Collinsville, Oklahoma
Contact:

Re: Anchoring tower

Post by PaulV »

Old thread on similar... You just have to find a way that works best for your situation.

viewtopic.php?p=502&hilit=Hinged+anchors#p502
PaulV
CTXmiller
Posts: 1094
Joined: Sat Dec 15, 2018 12:01 pm
Location: Waco, TX

Re: Anchoring tower

Post by CTXmiller »

Windy - That 6’ isn’t going anywhere. Semi-residential, a smaller wheel with 1/4” hinged plate as well, plus four 5/8” bolts per plate.

I have a brother-in-law that we did the same hinged feet on and he was going to bolt a 27’ B602 the same way, but with deeper anchor bolts. The stainless plate is 1/4” and he bolted it to rock that was underneath it. I wasn’t there on the install/erection of it, but for some reason he then put a yard or two of concrete under it…a hair overkill. He basically wasted the 1/4” stainless plate.
You do not have the required permissions to view the files attached to this post.
User avatar
windybob
Posts: 3873
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Anchoring tower

Post by windybob »

I see. A lot more to it than I thought!
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Windcatcher530 Dan
Posts: 2207
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Anchoring tower

Post by Windcatcher530 Dan »

Russell if you use four 5/8 anchors per leg and at least 5 inches long you should be fine. The tower would buckle before pulling out of the cement.
Russail
Posts: 81
Joined: Thu Aug 26, 2021 3:19 pm
Location: Bixby oklahoma

Re: Anchoring tower

Post by Russail »

Thanks for all the feedback. You guys are great to share your wisdom with others that are trying to learn.
Post Reply