Need Help Identifying

[Windcatcher530 Dan]

If the crank plate part number on the steel star direct stroke is the same as his mill than i agree it's a steel star.

[seager]

Here are some additional photos to help identify the windmill on my dad’s farm. Appreciate all your help.

[CTXmiller]

I’m still thinking a F&W direct stroke Steel Star.

[Windcatcher530 Dan]

I agree it definitely is a F and W mill and tower the only thing that puzzles me is the Hub. They might have made a special Hub for the direct stroke.

[CTXmiller]

The hub looks accurate to the parts list. The hub for the 8’ seems to be one piece while the 10’ and larger appear two piece.

Link to parts list
http://vintagewindmillpartslist.com/FWDSparts.pdf

[Windcatcher530 Dan]

Michael what i meant was it's a different style Hub from the back stroke mill. Check out your hub on your Mill and you'll see what I mean.

[CTXmiller]

Dan,

I don’t own a single F&W as there are very few in my area, but I do see what you’re saying when comparing photos and parts list to the back geared.

[Windcatcher530 Dan]

Sorry Michael I got you mixed up with Mark who has one. Another senior moment !!!

[mtblah]

Steve , that is a great looking set-up , get the head down on the ground , MUCH easier to see & deal with what ails her .

[seager]

Thanks so much everyone for your comments and being able to identify this particular windmill. Now that, with your help, I will be able to do more research and work on this project.
Thanks