1905 Fairbanks Morse open gear

Share and discuss your windmill related projects.
User avatar
windybob
Posts: 3846
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: 1905 Fairbanks Morse open gear

Post by windybob »

My helper was telling me today how much he likes Kinetic Sand instead of BabbittRite. He will never go back. He pours all the bearings for X702 mills. Next time I pour a 602, I will certainly try it. Packs in tight, and smooth. Doesnt burn. Falls apart and out when you disturb it. I had posted a message about it some time ago.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
mtblah
Posts: 1951
Joined: Thu Mar 26, 2020 12:09 pm
Location: new braunfels TX

Re: 1905 Fairbanks Morse open gear

Post by mtblah »

Yes Bob there was a lengthy discussion about Kinetic Sand and how good it works , wood is just another tool in the tool box , all good ideas .
Windcatcher530 Dan
Posts: 2173
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: 1905 Fairbanks Morse open gear

Post by Windcatcher530 Dan »

Just a little cosmetic work and the new bearing fit fine. Slid the hub and shaft in place put the brake band on and the mill is complete for now until spring when I can move it to the windmill barn. Eventually I'll start working on wheels and tailvanes for my mills.
20240128_151854.jpg
20240128_151819.jpg
You do not have the required permissions to view the files attached to this post.
IvanBlock
Posts: 87
Joined: Wed Jan 02, 2019 8:57 am
Location: central Wisconsin

Re: 1905 Fairbanks Morse open gear

Post by IvanBlock »

Hey Dan, just looked at pictures you posted on Jan 5 of Gem wheel sections. Wanted to let you know they are not USWE Gem sections they are Temple Pump Co. Diamond sections...
Windcatcher530 Dan
Posts: 2173
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: 1905 Fairbanks Morse open gear

Post by Windcatcher530 Dan »

Good to hear from you Ivan. I'm not familiar with the temple windmill co. Would you happen to have one in your collection you could post a pic of ? I would love to see one, thanks !!
IvanBlock
Posts: 87
Joined: Wed Jan 02, 2019 8:57 am
Location: central Wisconsin

Re: 1905 Fairbanks Morse open gear

Post by IvanBlock »

100_2447.jpg
100_2566.jpg
102_9199 (1).JPG
Dan a few pictures attached. Diamond windmill made by Temple Pump Co. Chicago, IL.. Nice 6 section wheel for 8 foot Diamond up in my rafters, if anyone is in need of one contact me. Finally a picture compairing Diamond and Gem wheel sections. As can be seen the outer rim of the Diamond section passes through the sail, not so with the Gem...
You do not have the required permissions to view the files attached to this post.
Windcatcher530 Dan
Posts: 2173
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: 1905 Fairbanks Morse open gear

Post by Windcatcher530 Dan »

Thanks for the pics Ivan.I did a little research after your post on temple mills and did see they made the Diamond windmill probably not a common Mill. I can see now how the Gem and Diamond wheel are very close. I learned something new. Thanks !!!
mtblah
Posts: 1951
Joined: Thu Mar 26, 2020 12:09 pm
Location: new braunfels TX

Re: 1905 Fairbanks Morse open gear

Post by mtblah »

Ivan , thanks for the photos showing the slight veriation of each and having a sample on hand . Looks like the good stuff is stored in the rafters . :roll:
User avatar
windybob
Posts: 3846
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: 1905 Fairbanks Morse open gear

Post by windybob »

I have a perfect Diamond tail, and restencilled. Never did find the rest of the stuff.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Post Reply