Page 1 of 1

Tower identification help

Posted: Mon Jan 10, 2022 1:30 pm
by ericghouston
Does anyone have thoughts on tower model/maker?

Tower roughly 30’
Base is 6.5’ wide

I believe it has a Aermotor mast but I think the tower is from another maker due to ladder type. Any thoughts would be helpful.

Thanks
Eric G

Re: Tower identification help

Posted: Mon Jan 10, 2022 3:24 pm
by CTXmiller
Maybe a Challenge tower?

Welcome to the forum.

Re: Tower identification help

Posted: Mon Jan 10, 2022 5:44 pm
by ericghouston
definitely see similarities
Thanks

Re: Tower identification help

Posted: Mon Jan 10, 2022 7:21 pm
by mtblah
Eric , welcome from south central TX

Re: Tower identification help

Posted: Tue Jan 11, 2022 8:38 am
by PaulV
Welcome Eric. Looks similar to a couple of Challenge towers we have.

Re: Tower identification help

Posted: Tue Jan 11, 2022 4:58 pm
by windybob
I'll go with Challenge. Flat X braces, but have 3 holes around the crossed area. Other towers have flat X braces, no holes.

Aermotor stub on top.

Might look on the inside of the legs for a date. Old Challenge towers I have seen have a date stenciled there.

Re: Tower identification help

Posted: Tue Jan 11, 2022 6:25 pm
by PaulV
X brakes from what I believe to be Challenge towers...two different towers...one with multiple holes at the X, one without.

IMG_20220111_181449.jpg

IMG_20220111_181553.jpg

Re: Tower identification help

Posted: Wed Jan 12, 2022 2:59 pm
by ericghouston
Thanks for all the info guys. Will look on inside legs for date details.

I plan to rebuild the tower platform. Would you suggest using pressure treated 2"x10" for platform?

Re: Tower identification help

Posted: Wed Jan 12, 2022 5:46 pm
by Windcatcher530 Dan
Welcome to the forum Eric. what I usually use is inch and a quarter by six inch treated deck boards with rounded edges.