Page 1 of 1
10 foot Heller Aller
Posted: Wed Jan 26, 2022 2:36 pm
by rockingjl
Hey to everyone. I have a friend that has a 10 foot Heller Aller. What do I look for to help identify it? I am going to look at it over the weekend. I know to start he only has one bent wheel arm and the outer part of the hub is broken and missing. He would like to see if he can find copies of assembly instructions for the head & tower. Thanks!! Jeff
Re: 10 foot Heller Aller
Posted: Wed Jan 26, 2022 2:57 pm
by Windcatcher530 Dan
Yes that is a heller aller.
Re: 10 foot Heller Aller
Posted: Wed Jan 26, 2022 3:05 pm
by windybob
Should say on the case... MOD 10
Re: 10 foot Heller Aller
Posted: Wed Jan 26, 2022 7:13 pm
by IvanBlock
Jeff that's not a Heller-Aller wheel arm. HA has a two-piece arm, angle iron and flat stock. See attached picture...
IMG_0824.JPG
Re: 10 foot Heller Aller
Posted: Wed Jan 26, 2022 8:04 pm
by Windcatcher530 Dan
That wheel arm looks challenge if the hole on top is square it could be Stover
Re: 10 foot Heller Aller
Posted: Fri Jan 28, 2022 3:29 pm
by rockingjl
Thanks guys!!! I need to go look, he may have the arms and not realize it
Re: 10 foot Heller Aller
Posted: Sat Jan 29, 2022 8:34 am
by Wayne
Plus with two cross pieces probably 10 ft or better.
Re: 10 foot Heller Aller
Posted: Sun Jan 30, 2022 8:57 am
by rockingjl
welllll my friend has a tower project; he will look for an Aermotor to put on top.
It almost looks like someone spent time making sails but then pop riveted everything together, maybe they were going for wall art. lots of pieces missing, no helmet, missing blades, inner & outer bands bent, head does look rebuildable