Parts ID

Have a part you can't identify? Did your parts get mixed up in the shop? Curious if that chunk of metal is a part you should keep? Not sure what kind of windmill or tower you have? Post photos of the mystery object here for the community to help identify.
Post Reply
Terry
Posts: 222
Joined: Thu Dec 27, 2018 8:32 pm
Location: Moundridge Ks.

Parts ID

Post by Terry »

Asking for a friend for a ID on the tower cap and storm stay.
Is it a Woodmance?
Thank you for your help.
Terry
output_image1647132944641.jpg
output_image1647132854579.jpg
You do not have the required permissions to view the files attached to this post.
Windcatcher530 Dan
Posts: 1899
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Parts ID

Post by Windcatcher530 Dan »

Terry besides the four tower bolt holes are the other holes for oiling?
mtblah
Posts: 1624
Joined: Thu Mar 26, 2020 12:09 pm
Location: new braunfels TX

Re: Parts ID

Post by mtblah »

Top photo same as my Ideal Steel.
Mike B
Wayne
Posts: 2115
Joined: Mon Dec 17, 2018 10:03 am
Location: Corsicana Tx.

Re: Parts ID

Post by Wayne »

Dan, if you are asking about the top casting the other holes are so you could also use it in a three legged tower.
Windcatcher530 Dan
Posts: 1899
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Parts ID

Post by Windcatcher530 Dan »

Gotcha, thanks Wayne. Other companies should have thought of that
Wayne
Posts: 2115
Joined: Mon Dec 17, 2018 10:03 am
Location: Corsicana Tx.

Re: Parts ID

Post by Wayne »

I think Monitor also did one. Think I have a three legged tower with the monitor casting.
User avatar
windybob
Posts: 3503
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Parts ID

Post by windybob »

If it is a Monitor tower top, it's in very good shape. Those always wear on one side and get egged real bad. Monitor also put a side in for a grease cup. Need to check one at the shop, see if the number matches. If it is NOT a Monitor top, it resembles one. The stay is a Stover. Also used for Woodmanse later on, after they bought out Stover.
Call Dan Benjamin for parts. P M me for the phone number.
Post Reply