Power Mill
Posted: Tue May 17, 2022 9:20 pm
Hi All,
I drove to Saskatchewan over the weekend to visit Mike .I toke the rims that I
made for his Dempster #14. Picked up a well pump and he had a brake drum I needed
for the home made power mill that employed the rear end of a 1939 Ford truck,
using the sails ,vane and furling mechanism from a 10 foot F & W mill which I have.
Now what I require .is the hub or the dimension of same with diameter so I
have something to guide me in making a hub that will bolt to the the drum.
Hoping for the best.
Joe
I drove to Saskatchewan over the weekend to visit Mike .I toke the rims that I
made for his Dempster #14. Picked up a well pump and he had a brake drum I needed
for the home made power mill that employed the rear end of a 1939 Ford truck,
using the sails ,vane and furling mechanism from a 10 foot F & W mill which I have.
Now what I require .is the hub or the dimension of same with diameter so I
have something to guide me in making a hub that will bolt to the the drum.
Hoping for the best.
Joe