Stover Samson

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Wed Jan 18, 2023 5:47 pm

I need a tailvane for a 8ft open gear Samson. I have the tailbone Thanks Dan !!

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Fri Jan 20, 2023 9:09 am

Does anyone have a picture and measurements of a tailvane incase i don't find one? Thanks Dan

hwy8 · Post by **hwy8** » Fri Jan 20, 2023 11:43 pm

Hey Dan, I wouldn't know one Samson from another, but I thought you might want to see this photo I had in my file...Burt

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Sat Jan 21, 2023 6:58 am

Thanks Burt i believe that is mine!!!

Wayne · Post by **Wayne** » Sat Jan 21, 2023 8:42 am

The measurements are 17 inches narrow end 36 3/4 wide end and 48 long. It has the rod around the edges. Mine is a two piece riveted together down the middle with 3 cross straps.

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Sat Jan 21, 2023 10:06 am

Thanks Wayne do you have a picture you could share.

RandyGreigKS · Post by **RandyGreigKS** » Sat Jan 21, 2023 7:36 pm

I have 2 samson tail vanes one with arm one without. Randy Greig Hoxie kansas 785 657 7167

Windcatcher530 Dan · Post by **Windcatcher530 Dan** » Sat Jan 21, 2023 9:20 pm

Randy are the tailvanes you have for an open gear Samson cause the oil bath i believe were different.

Wayne · Post by **Wayne** » Sun Jan 22, 2023 7:17 am

I'll takes a picture today and post it.

Wayne · Post by **Wayne** » Sun Jan 22, 2023 10:41 am

image000000(188).jpg

Here's the vane Dan! Pack you some snacks, get in the pickup and drive down to Corsicana. We can visit and tell lies for awhile, then you could take it home.

Vintage Windmill and Wind Generator Forum

Stover Samson

Stover Samson

Re: Stover Samson

Re: Stover Samson

Re: Stover Samson

Re: Stover Samson

Re: Stover Samson

Re: Stover Samson

Re: Stover Samson

Re: Stover Samson

Re: Stover Samson