Vintage Windmill and Wind Generator Forum

I picked this up a few years back what I believe is a wincharger.Im not interested in getting it to produce electric cause I'm sure there's to many parts missing.My thought was to mount it on top of a 20ft FW tower if possible. I'm assuming the tailbone was angle iron and plan on making it and tailvane. My questions are did this have a ballbearing turntable and what it looks like also what the hub looks like. Thanks for any help and pics. I would love to see it spinning !!

Hey Dan, looks like a model 1222H. Below is a link to where you can download the manual which has parts diagrams. Those did have a ball bearing thrust bearing. I also had a recent post (for sale category) with pics of a NOS one of these that may also be useful.

https://vintagewindmillforum.com/viewtopic.php?t=234

Hey Mike thanks for the info very helpful. Would you happen to have a spare Hub laying around you would like to sell?

The hub usually refers to the part the fits on the end of the generator shaft and connects to the propeller. Since you have that part are you talking about the pivot connection to the tower?

I need the piece or pieces that bolt on my hub that the brake goes against and the propellers bolt on too

You need the 10” brake drum. I checked last night and don’t currently have any not affiliated with a complete machine. The 10” are less common than the 8” brake drums used on the 6V and many 32V geared Winchargers. I’ll keep an eye out for you.
Btw the 8” brake drum is same as the model t emergency brake, just a different hole pattern. It’s likely that the 10” may be the same from an early Ford truck….haven’t figured out which model yet.

Thanks Mike !

Now that's interesting!