Vintage Windmill and Wind Generator Forum

Question, what connections do I need to disconnect to remove gear case from tower for transportation to shop ? On clubs 702 Glenn Miller

There is a mast pipe nut and it’s accompanying washer that need to be removed. You have to take off the bonnet to access it. It is pretty good sized and at the top of the mast pipe. Also remove the pump rod from the yoke. The yoke is also under the bonnet and what the pump rod connects to within the gearbox. Someone can add to what I wrote, if I forgot something.

Excellent, can’t thank you enough for the quick response as I’m getting ready tools for tomorrow mornings work on mill please take care

Glenn , may I also add , take PHOTO's before you dissamble , when someone wants to reassemble these photos will be invaluable , LOTS of photos

Thank you for your valuable suggestion I will take your advice and purchase a memory stick to download all the photos just for this project thanks so much again. Glenn