Page 1 of 1
Used anybody's gears
Posted: Sat Apr 06, 2019 9:46 am
by Wayne
I am looking for two wore out gears that you may be going to discard that are the same. No bigger than 4 inches dia width or bore size doesn't matter. A friend gave me what we call it cup towel with a Flint and Walling Windmill with vane on it. I want to make a towel rack to display it one. Will pay for shipping to Corsicana. Even with a tooth or two missing is fine. You can email me at
jjnfrasier@juno.com if you have such and want to part with them. Thabks Wayne
Re: Used anybody's gears
Posted: Sat Apr 06, 2019 6:28 pm
by windybob
Wayne, I have boxes of gears. However no F/W ones. I know it doesn't matter. Let me know what you want.
Re: Used anybody's gears
Posted: Mon Apr 08, 2019 8:43 am
by Wayne
Windy, In my mind the gears would be matching, 3 1/2 inch dia by 3/4 to 1 inch wide. Shaft hole 3/4 to 1inch. You can send them to; Wayne Rogers
8209 FM 744
Corsicana Tx 75110. Call or text me with your turn key price shipping and handling and gears. 903-571-0865
Thanks
Re: Used anybody's gears
Posted: Mon Apr 08, 2019 6:06 pm
by windybob
Wayne I got you private message, and asked you a couple questions. Maybe you didn't see it yet....
Re: Used anybody's gears
Posted: Tue Apr 09, 2019 9:54 am
by Wayne
Windy I sent you a message yesterday and today. Any gear is fine i can adjust shaft if it needs to be longer. Do you still have clips for blades. If you do send me 6 outers and 6 inners smallest you have. Add to my bill
Re: Used anybody's gears
Posted: Tue Apr 09, 2019 6:41 pm
by windybob
Okay, just tell me whether you want to to trim the hubs off the gears. I can deduct the discarded hubs from your bill......LOL
Re: Used anybody's gears
Posted: Wed Apr 10, 2019 9:10 am
by Wayne
That would be good!
Re: Used anybody's gears
Posted: Wed Apr 10, 2019 6:54 pm
by windybob
Okay. Consider it done.