I have a acquired a 3 post Stover tower that is in need of a mill. I'd like to find a Sampson Air Flow (my first choice) or some other 6 foot Stover mill to complete it. I'd prefer something fairly complete and in need of a rebuild but will entertain looking at anything that is available.
Thanks in advance for any advice or leads.
Jim
Stover Samson 6' ft. or 6.5 ft. windmill
- Jim Corcoran
- Posts: 304
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Stover Samson 6' ft. or 6.5 ft. windmill
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
Re: Stover Samson 6' ft. or 6.5 ft. windmill
So it sounds like you wish to perform a good marriage.
I would like an Air-Flow also. If you find a set of twins, let me know.
I would like an Air-Flow also. If you find a set of twins, let me know.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
- Jim Corcoran
- Posts: 304
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Re: Stover Samson 6' ft. or 6.5 ft. windmill
Bob,
Will do. I know very little about Stover/Samson windmills but it appears a 6 foot Model S or M would work for me as well. Although, the unique tail vane on the Air Flow would look more interesting on my tower.
Regards,
Jim
Will do. I know very little about Stover/Samson windmills but it appears a 6 foot Model S or M would work for me as well. Although, the unique tail vane on the Air Flow would look more interesting on my tower.
Regards,
Jim
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
Re: Stover Samson 6' ft. or 6.5 ft. windmill
I was over at the boneyard today spraying weeds. ( way too late) Seems I have several Stovers of various breeds and sizes, but not really sure what the collection consists of until I get things more sorted out. Getting harder and harder to see anything with all the rain and growth this year. I have some pit-liner I will put down, and move everything on to it. Then finally I won't need to spray as much, and will be able to see most of the stuff.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
- Jim Corcoran
- Posts: 304
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Re: Stover Samson 6' ft. or 6.5 ft. windmill
Still looking for a 6 foot Stover Samson. Will be traveling to Nebraska City on Labor day and will be in that part of the country for 2-3 days so will be able to pick one up while there. Will be traveling IH35/335 from Austin to Topeka. Any leads would be greatly appreciated.
Jim
Jim
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
Re: Stover Samson 6' ft. or 6.5 ft. windmill
That would be the open gear model?
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
- Jim Corcoran
- Posts: 304
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Re: Stover Samson 6' ft. or 6.5 ft. windmill
No. I'm looking for a Samson Model S, Model M, or Air flow. The literature says the OIl-Rite Models S and M came in 6 foot and the Air-Flow in 6-1/2 foot.
Jim
Jim
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
Re: Stover Samson 6' ft. or 6.5 ft. windmill
Yes. I have 8 footers. Was looking for a 6 footer when I needed some parts for my re-store, but I just saw 8 footers. If I did have a 6, it would only be a head. Would that work?
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
- Jim Corcoran
- Posts: 304
- Joined: Fri Dec 21, 2018 7:32 am
- Location: Austin, Texas
Re: Stover Samson 6' ft. or 6.5 ft. windmill
Bob,
Just a head would be okay depending on how complete it is. I'm looking for something I can rebuild rather than something already rebuilt. This is just a project to put up in my back yard for fun. It won't be pumping water.
Jim
Just a head would be okay depending on how complete it is. I'm looking for something I can rebuild rather than something already rebuilt. This is just a project to put up in my back yard for fun. It won't be pumping water.
Jim
" You need to get at least 30 miles out of Austin before you're firmly back in Texas."
Re: Stover Samson 6' ft. or 6.5 ft. windmill
OKay, I will try to remember this about as good as what color a WG is.....
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.