Page 1 of 1
Help with tower ID
Posted: Thu Aug 08, 2019 5:50 am
by Wind Charger Mike
?????
Thanks
Re: Help with tower ID
Posted: Thu Aug 08, 2019 9:41 am
by Wayne
I have a similar tower have wondered if it was Woodmanse?
Re: Help with tower ID
Posted: Thu Aug 08, 2019 5:35 pm
by windybob
Where did it go? ? I posted that I thought it was Stover. Guess it evaporated.
Re: Help with tower ID
Posted: Thu Aug 08, 2019 5:55 pm
by CTXmiller
I’d second the Stover guess.
Re: Help with tower ID
Posted: Thu Aug 08, 2019 6:59 pm
by Wind Charger Mike
I appreciate the help, thanks
Re: Help with tower ID
Posted: Fri Aug 09, 2019 9:36 am
by Wayne
The ladder is unusual. Is that the clue? Mine has the same ladder.
Re: Help with tower ID
Posted: Fri Aug 09, 2019 10:22 am
by Jim Corcoran
Same ladder steps and twisted wire cross braces as my three legged Stover tower. However the head plate on mine is different.
Jim
Re: Help with tower ID
Posted: Sat Aug 10, 2019 9:29 am
by Wayne
I have two of those towers one didn't have a top plate i bought one from Verdon the other had the bottom part of the top casting.
Re: Help with tower ID
Posted: Wed Aug 14, 2019 8:44 pm
by steve p
Kinda looks like the tower cap and plate for an Ideal Steel.