Page 1 of 1
Dempster 2" style B windmill tower
Posted: Thu Nov 28, 2019 11:37 am
by bluezx6r
Hello everyone. Im working on acquiring missing parts for my dempster tower. Im in need of 39 eccentric washers for securing and taking slack out of the cross braces, as shown in the attached picture. Im sure i can get some fabricated but if anyone has some origionals please let me know what youd want for them. Im also looking for an origional dempster pullout. Thanks and I hope everyone has a great Thanksgiving!
IMG_20191116_152522137.jpg
Re: Dempster 2" style B windmill tower
Posted: Thu Nov 28, 2019 2:24 pm
by CTXmiller
39 of them for one tower?
Re: Dempster 2" style B windmill tower
Posted: Thu Nov 28, 2019 2:25 pm
by windybob
fyi, the eccentrics are usually on only one end of the twisted wire brace. I have a bunch, but I think they are mostly Stovers. A bit of a different measurement. On a tower needing approx 40, that would be like a 60 ft tower.
Re: Dempster 2" style B windmill tower
Posted: Tue Dec 03, 2019 8:19 pm
by Dave Straub
I can spare 20 of them. Send me a PM
Re: Dempster 2" style B windmill tower
Posted: Fri Dec 06, 2019 6:56 pm
by windybob
I can make up the rest of them. Here's a little more info for folks. Dempster on the right, Stover on the left. The circle is what I measured.
eccentrics.jpeg
Re: Dempster 2" style B windmill tower
Posted: Sat Dec 07, 2019 4:40 pm
by JLM
It seems that the Dempsters were galvanized while the Stovers are unpainted