SOLD - Clayton Mark Deep Well Pump

[gregguy]

Pump Well Cylinder, NEW/NOS 1 1/2" X 20", all brass.
Made in the USA

Brand new Clayton Mark, an open top all brass well cylinder 1 1/2" X 20" size.
Perfect in every way. Includes 2 leather pump valve a single leather foot valve.
Fits standard 1 1/2 " pipe. Looks like a 1 pipe thread on the bottom.
My guess is this should be used for a 12" or shorter stroke.

Says MADE IN USA on the casting.

$150 with shipping

[Ron Stauffer]

You may want to double check your cylinder ID and pipe size for this. Cylinder ID of 1.5" and drop pipe size of 1.5" (1.61" ID actual) only gives less than 1/8 of clearance to pull the working check and bottom check through the drop pipe as you would do on an open top cylinder. 1 7/8 cylinder on 2 pipe has .2 clearance and is tight on pipe that has been in and corroded.

BTW, I have had a US made Clayton Mark 2.75" open top cylinder on my own well for over 7 years with no issues. Mine doesnt have the spring loaded checks but does have spool checks vs ball. I dont run across much CM cylinders as there was no distributor in this area, I think I got mine from someone's inventory I bought out.

Ron Stauffer
Montrose CO

[gregguy]

This pump has sold.
Not sure how to remove the ad...............thanks