Dandy In the air
Re: Dandy In the air
Great job Wayne
Re: Dandy In the air
This one has small gears only about 1 1/4 wide with no rim and the brake is a full 360 not just at the top and bottom. I was thinking the larger gears with rims and the brake with only contact at the top and bottom where after 1895.
-
- Posts: 2220
- Joined: Sun Mar 28, 2021 4:06 pm
- Location: Alcove N.Y.i buy and restore
Re: Dandy In the air
According to the parts litterateur and diagrams i have the original Dandy had no brake on it. The new improved model 1895 had a full brake and same small gears. Through the years they changed the brake to two pieces and put the wide lip on the gears like the ones on the irragator model.
Re: Dandy In the air
I have one with the big gears it's not an irragator model. Jimmie gave one to the Wind Power center it also had the big gears and small brake and isn't an irragator. I think they went to they bigger gears for all rather than having to make two castings. I also learned the frame, and gears are the same for am 8f ft and a 10ft. the one I have with the bigger gears is the same as my 8 ft except for the size of gears and it's a 10 ft.
-
- Posts: 2220
- Joined: Sun Mar 28, 2021 4:06 pm
- Location: Alcove N.Y.i buy and restore
Re: Dandy In the air
Yes your right Wayne I read that too.I also found out the latter dandys had a side vane besides the regular tailvane like the Challenge Steel.I have both tailbone hinges