Butler missing part

Well and cistern setup, repair, components (pumps, etc.), etc.
Post Reply
jcbrownf
Posts: 2
Joined: Fri Oct 07, 2022 4:57 pm
Location: Fisher il

Butler missing part

Post by jcbrownf »

I got this in auction and it's missing handle.. Not sure what year and exactly what it is I know it is says Butler Indiana on it..
Any info will help
You do not have the required permissions to view the files attached to this post.
User avatar
windybob
Posts: 3870
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Getting ready to put up my second mill

Post by windybob »

Butler was a company that made windmills, pumps, and other items for water supply. They were a pretty big company and sold items all over the country.

Looks like maybe the head on the pump may take a handle that is common to many hand pumps. Not sure, but looks like it. Love those lattice pumps.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Windcatcher530 Dan
Posts: 2205
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Butler missing part

Post by Windcatcher530 Dan »

Nice find John!!
User avatar
windybob
Posts: 3870
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Butler missing part

Post by windybob »

also looks like you'll need the fulcrum to go with the handle. If anyone has any old butler literature, maybe there will be a picture of it. The fulcrum is the part the handle pins to, and the fulcrum pins to the lower ears on the head. Most handpumps need a floating fulcrum due to the vertical pinning of the handle to the flat bar coming out of the top of the pump. There are a few different makes of these items, having different measurements. Measure between the ears and the outside measurement also on the fulcrum mounting ears. If anyone around has an old handpump on their well, if the measurements are close, maybe borrow the two items and see if they work. All the fittings should be pinned, (or, probably bolted by now) because they need to move. It's surprising to me how many handpumps use the same or very similar items.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
mtblah
Posts: 1997
Joined: Thu Mar 26, 2020 12:09 pm
Location: new braunfels TX

Re: Butler missing part

Post by mtblah »

John , cool jack , no handle so pump was probably attached to the windmill and never hand pumped .
I am sure one of the supermen on this windmill site will help find a handle that will work .
When you look at past posting in this section you will see other lattice pump photos , special find .
Windcatcher530 Dan
Posts: 2205
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Butler missing part

Post by Windcatcher530 Dan »

John i took a better look at your pump and i think that style pump you have is called a force pump cause it doesn't have a chamber.Thats my guess.
Windcatcher530 Dan
Posts: 2205
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Butler missing part

Post by Windcatcher530 Dan »

John a little info, Butler started making pumps as early as 1891 from what I can tell . Nice!!
Kansas Rust Buzzard
Posts: 578
Joined: Fri Dec 28, 2018 9:33 pm

Re: Butler missing part

Post by Kansas Rust Buzzard »

I don't see Butler pumps around here, its a gorgeous example!
Post Reply