Challenge 27 literature

Generally speaking, this area is for general discussion about windmills, in most cases.
Post Reply
Kenneth
Posts: 346
Joined: Fri Dec 28, 2018 11:03 am
Location: Tomball TX.

Re: Challenge 27 literature

Post by Kenneth »

I found something on this mill I have never seen before. I will post pics later.
Top
User avatar
windybob
Posts: 3804
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Challenge 27 literature

Post by windybob »

All this info belongs in the library if it's not in there already....just sayin'...
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Top
User avatar
PaulV
Site Admin
Posts: 1096
Joined: Wed Dec 12, 2018 10:52 pm
Location: Collinsville, Oklahoma
Contact:
Contact PaulV

Re: Challenge 27 literature

Post by PaulV »

windybob wrote: ↑Mon Sep 09, 2024 11:07 am All this info belongs in the library if it's not in there already....just sayin'...
Agree. I'll be adding it to the library soon.
PaulV
Top
Kenneth
Posts: 346
Joined: Fri Dec 28, 2018 11:03 am
Location: Tomball TX.

Re: Challenge 27 literature

Post by Kenneth »

Ok. I took the pump rod out of the gearbox on the work table. It was still in the gearbox when I got it. Long story, don't ask. Anyway I could not get the pump rod to slide out of the pullout tube.so I removed the bottom cap and slid out the pump rod and the pullout tube together. After looking at it, the chain had broken and fell down the center pipe. And about 18 inches of the chain was wedged between the pumprod and the inside of the tube. That is a new one on me. Have never seen that before. Had to split the tube to get clearance to remove the chain.
20240909_145743.jpg
20240909_145749.jpg
20240909_140716.jpg
You do not have the required permissions to view the files attached to this post.
Top
User avatar
windybob
Posts: 3804
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Challenge 27 literature

Post by windybob »

I can't remember that happening to me, but I have seen chains in wells that really screwed up everything.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Top
Kenneth
Posts: 346
Joined: Fri Dec 28, 2018 11:03 am
Location: Tomball TX.

Re: Challenge 27 literature

Post by Kenneth »

I am moving this thread to the Projects section.
Top
Kenneth
Posts: 346
Joined: Fri Dec 28, 2018 11:03 am
Location: Tomball TX.

Re: Challenge 27 literature

Post by Kenneth »

Does anyone know how much oil for the 8ft. Challenge 27?
Thanks.
Top
Windcatcher530 Dan
Posts: 2121
Joined: Sun Mar 28, 2021 4:06 pm
Location: Alcove N.Y.i buy and restore

Re: Challenge 27 literature

Post by Windcatcher530 Dan »

My NOS came with two quarts.
Top
Kenneth
Posts: 346
Joined: Fri Dec 28, 2018 11:03 am
Location: Tomball TX.

Re: Challenge 27 literature

Post by Kenneth »

Thanks Dan.
Top
Post Reply

Return to “General Discussion - Windmill”