Aermoter open gear main frame identification

[Windcatcher530 Dan]

# 2 is on main frame of vertical spring and Bell Hub ---# 202 is on main frame of the model 98 --- #402 is on the main frame of the model 99 ---#302 is on the main frame of the 03 model ---02 is on the main frame of the RA model 02 1/2 is on the upper arm shaft and 02 1/4 is on the lower.---152 1/3 IS ON the main frame of the Heavy duty 07 RA model.These numbers will follow the letter which determines the size of the mill.

[Minnemiller]

The number 95 is the main frame of Bell Hub at the wind power center.

[Windcatcher530 Dan]

Jud are you sure about that ? My three all have A on them and also according to the parts list it should be A.

[mtblah]

Dan , what are you doing awake at 3 AM ???

[Windcatcher530 Dan]

I go to bed early Mike ! Usually around 10 or 10.30 !!

[Minnemiller]

Dan yes, it has A and something after the A, but 95 a safe distance before the A in the middle of the main frame.

[Windcatcher530 Dan]

Judd is the 95 etched in the frame if so for some reason they might have etched the year it was manufactured that's the only explanation I can think of.

[Minnemiller]

Dan,

No its cast. It sure is bold like a part number. I was wondering if it was the year as well, but I've never seen that cast in with part number quality besides the patent dates on the oil bath aermotors. So i suppose its possible if the pattern maker wanted it or was directed to do that. Curious to look at other bell hub frames now!

[Windcatcher530 Dan]

Judd by any chance is that a power mill cause that frame would be different and that would explain the 95 being cast on it ?

[Minnemiller]

Nope just a regular old 8ft pumper.

Jud