Wheel make and model?

Have a part you can't identify? Did your parts get mixed up in the shop? Curious if that chunk of metal is a part you should keep? Not sure what kind of windmill or tower you have? Post photos of the mystery object here for the community to help identify.
Post Reply
Fire_fighter2171
Posts: 13
Joined: Thu Oct 15, 2020 10:56 am
Location: Lemon Cove

Wheel make and model?

Post by Fire_fighter2171 »

I need some help identifying these three wheels. See attached pictures and measurements.There are a total of three different wheels. If you need any additional pictures let me know. Thank you in advance!
You do not have the required permissions to view the files attached to this post.
Top
rockingjl
Posts: 249
Joined: Fri Dec 14, 2018 5:40 pm
Location: Phoenix Az

Re: Wheel make and model?

Post by rockingjl »

Not an expert by any stretch of the imagination. My guess, 2 Aermoter and a Samson
Top
User avatar
windybob
Posts: 3870
Joined: Mon Jan 14, 2019 5:59 pm
Location: Ames Oklahoma

Re: Wheel make and model?

Post by windybob »

I agree.
Call Dan Benjamin for parts. P M me for the phone number. IF YOU TALK TO HIM, AND HE HELPS YOU, THEN BUY FROM HIM. IT CREATES GOOD KARMA.
Top
User avatar
Bryon
Posts: 206
Joined: Sat Feb 16, 2019 4:35 pm
Location: Eastman, GA

Re: Wheel make and model?

Post by Bryon »

One Aermotor wheel has single rivets, that would be before the 702 or late 602. The double rivet could be late 602 but definitely 702. The last photo is probably a 10 ft wheel. The single rivet Aermotor wheel is probably an 8 ft.
Top
IvanBlock
Posts: 87
Joined: Wed Jan 02, 2019 8:57 am
Location: central Wisconsin

Re: Wheel make and model?

Post by IvanBlock »

The single rivet Aermotor sections (1932 or before) are for a 10 footer (36 1/2" sails) The double rivet Aermotor sections (1933 or later) are for a 12 footer (44" sails) The Samson or Ideal Steel sails are 40 1/2" long so they were probably for a 10 foot wheel...
Top
Fire_fighter2171
Posts: 13
Joined: Thu Oct 15, 2020 10:56 am
Location: Lemon Cove

Re: Wheel make and model?

Post by Fire_fighter2171 »

Thanks guys, I really appreciate the help!
Top
Post Reply

Return to “Name That Part (or Windmill or Tower)”