Stover Samson
Posted: Wed Jan 18, 2023 5:47 pm
I need a tailvane for a 8ft open gear Samson. I have the tailbone Thanks Dan !!
Vintage Windmill and Wind Generator Forum
Est. Dec. 13, 2018
https://vintagewindmillforum.com/
Stover Samson
Page 1 of 2
Re: Stover Samson
Posted: Fri Jan 20, 2023 9:09 am
Does anyone have a picture and measurements of a tailvane incase i don't find one? Thanks Dan
Re: Stover Samson
Posted: Fri Jan 20, 2023 11:43 pm
Hey Dan, I wouldn't know one Samson from another, but I thought you might want to see this photo I had in my file...Burt
Re: Stover Samson
Posted: Sat Jan 21, 2023 6:58 am
Thanks Burt i believe that is mine!!!
Re: Stover Samson
Posted: Sat Jan 21, 2023 8:42 am
The measurements are 17 inches narrow end 36 3/4 wide end and 48 long. It has the rod around the edges. Mine is a two piece riveted together down the middle with 3 cross straps.
Re: Stover Samson
Posted: Sat Jan 21, 2023 10:06 am
Thanks Wayne do you have a picture you could share.
Re: Stover Samson
Posted: Sat Jan 21, 2023 7:36 pm
I have 2 samson tail vanes one with arm one without. Randy Greig Hoxie kansas 785 657 7167
Re: Stover Samson
Posted: Sat Jan 21, 2023 9:20 pm
Randy are the tailvanes you have for an open gear Samson cause the oil bath i believe were different.
Re: Stover Samson
Posted: Sun Jan 22, 2023 7:17 am
I'll takes a picture today and post it.
Re: Stover Samson
Posted: Sun Jan 22, 2023 10:41 am
Here's the vane Dan! Pack you some snacks, get in the pickup and drive down to Corsicana. We can visit and tell lies for awhile, then you could take it home. 